HVAC technologies highlighted in two April webinars

Learn about promising energy-efficient technologies for commercial heating, cooling and ventilation systems in a two-part webinar, You are leaving WAPA.gov. presented by Energy Efficiency Emerging Technologies (E3T) April 8 and April 15, 1 p.m. Mountain Time.

The April 8 webinar You are leaving WAPA.gov. focuses on commercial HVAC motors and fans. Expert speakers will discuss the advantages of electronically commutated permanent magnet (ECPM) motors driving fans and pumps, permanent magnet AC motors including Q-Sync, and high-volume, low-speed fan technology.

The topics of the April 15 webinar are variable refrigerant flow and variable-speed split system heat pumps.

Western co-sponsors the Emerging Technologies Showcase series with the Bonneville Power Administration. These monthly webinars present the latest information about promising energy-efficiency technologies and practices that BPA is considering for future research opportunities.

The webinars are free, but registration is required.  Contact E3T for more information. All webinars are recorded and available on the E3T website and ConduitYou are leaving WAPA.gov.

Technology Spotlight: Saving energy with carbon dioxide

Carbon dioxide, the stuff we associate with exacerbating climate change, can actually help prevent climate change and save a lot of energy when used in the right technologies for appropriate applications, such as washing machines and water heaters.

CO2 washing machines
Commercial and industrial washing machines may be the last place you would expect to use CO2. This non-flammable, non-toxic, naturally occurring gas can be pressurized to become a liquid and used to clean laundry. In liquid form, CO2 has low viscosity and acts as a surfactant, which allows proprietary detergent formula to penetrate the fabric better than detergent in hot water. Liquid CO2 also disinfects, making it a good option for hospitals and industries with clean rooms, and a single machine can clean 100 to 200 pounds of laundry per hour.

 About 32 dry cleaning companies in the country are currently cleaning with the Glacier liquid CO2 system supplied by Solvair of Naperville, Illinois. The system uses no water and disinfects clothes completely. (Photo by Solvair Cleaning Technologies)
About 32 dry cleaning companies in the country are currently cleaning with the Glacier liquid CO2 system supplied by Solvair of Naperville, Illinois. The system uses no water and disinfects clothes completely. (Photo by Solvair Cleaning Technologies)

Once the clothes are clean, the CO2 is depressurized so it flashes back into a gas and the laundry is instantly dry. No dryer is needed, which greatly reduces energy use. The liquid gas does not harm delicate fabrics, and clothing lasts longer because high-temperature water and machine agitation are not needed. After each wash, the CO2 is captured, filtered, distilled, re-pressurized and reused.

CO2 washers are appropriate for large, centralized cleaning operations, such as hotels, hospitals, uniform cleaning companies, prisons, nursing homes, textile plants and industries with clean rooms.

According to a recent study by the California Energy Commission (CEC)Redirecting to a non-government site, CO2 washing machines achieved a 60-percent reduction in electrical energy use and a 46-percent reduction in natural gas use when compared with water-based cleaning. Eliminating water use completely provides users with additional savings. The CEC estimates that 8,000 facilities in California would be good candidates for this technology. Just a five-percent market penetration in that one state could save 264 million kilowatt-hours, 20 million therms, and more than 600 million gallons of water, according to the CEC.  The bottom line is that an investment in CO2 washers could have a two- to four-year payback.

CO2 heat pump water heaters
Another up-and-coming CO2 technology is the CO2 heat pump water heater (HPWH). Similar to the HPWHs available at home improvement stores, CO2 models are even more efficient at generating hot water for washing and space heating (with radiant floor, radiators, etc.).

Like CO2 washing machines, these water heaters compress CO2 until it becomes a liquid (at about 1,400 pounds per square inch). CO2 is more efficient than conventional refrigerants, and it has 1,000 times less effect on climate change.

The water tank is larger than a conventional water heater—usually about 80 gallons—allowing for some stratification of the water. The coolest water at the bottom of the tank is piped to the compressor for reheating, which optimizes efficiency. The water temperature is also higher than with a conventional water heater—about 150°F. The higher temperature, combined with a bigger tank, means that more people can take showers before the hot water runs out, even if the system turns off for a while during a utility’s peak demand reduction program.

In the split system version, the compressor and condensing fan are in a separate unit outside, which eliminates noise inside. The variable-speed drives on the fan, compressor and pump (the key to making this equipment so efficient) reduce the noise from the outside unit even more, meaning CO2 HPWHs are usually much quieter than conventional models. This also means the unit does not draw conditioned air from inside the home or small commercial building to heat the water, as un-ducted, single-unit HPWHs do. A smaller (40 gallon), single-unit, ducted CO2 HPWH may be available in the U.S. in the future.  Like the larger split-system version, it benefits from CO2 refrigerant, variable speed and use of outside air.

Even with a bigger tank, hotter water, a highly pressurized refrigerant and a compressor that pulls heat out of outside air during the winter, this technology uses less energy than conventional HPWHs: its efficiency is about 50 percent greater than conventional HPWHs, which are about twice as efficient as a conventional electric water heater. The delivery rate, measured by the number of back-to-back showers you can take without running out of hot water, is also about 50 percent better than a conventional HPWH.  CO2 HPWHs can be especially efficient when used in applications such as a commercial kitchen where the “outside” unit can be mounted high on a wall to provide hot water and cool air.

These are not just manufacturers’ claims, either; these are independent test results from a university and a national lab. The field study Washington State University (WSU) Energy ProgramRedirecting to a non-government site conducted indicates that the systems can provide both space and water heat for highly energy-efficient homes. The WSU Energy Program is working with the Next Step Home Program of the Northwest Energy Efficiency AllianceRedirecting to a non-government site to test this concept in a number of homes. Pacific Northwest National LaboratoryRedirecting to a non-government site is documenting the equipment’s potential to help reduce peak load demand.

Right now, CO2 HPWHs are available in the U.S. only in larger sizes for commercial and industrial applications. But the largest manufacturer expects to roll out their residential version in the U.S. in early 2015. The technology has been used in Asia, Europe and Australia for many years. Learn more about these and other new and emerging technologies from Energy Efficiency Emerging TechnologiesRedirecting to a non-government site.

New water heating system could improve multi-family residential efficiency

June 18
12:00 p.m. PDT

Introducing energy-efficiency into the residential rental market is a continual challenge to utility program managers, but a new technology has shown promise for reducing energy use in large multi-family buildings. Join the Emerging Technologies Showcase series on June 18 at 12:00 p.m. PDT to learn about Reverse Cycle ChillersRedirecting to a non-government site.

The free webinar will feature speakers from Seattle City Light discussing the new type of heat pump hot water heating system. The presentation includes case studies of a few Seattle projects, lessons learned, best practices, initial data on verified energy use, as well as the technology itself.

Western supports the Emerging Technologies showcase, sponsored by the Bonneville Power Administration. The monthly webinars bring you the latest information about new energy-efficiency technologies and practices that may be available commercially to help utilities meet their planning, environmental and budgeting goals. All webinars are recorded and available on the E3T websiteRedirecting to a non-government site and ConduitRedirecting to a non-government site.

Water heating technologies workshop announced

The latest Demand-side Management Technology Workshop, Advances in Water Heating Technologies, is coming to Western’s Rocky Mountain region August 31.

Learn about the latest developments that are making water heaters an even more valuable tool in demand-side management programs. This one-day event at Tri-State Generation and Transmission Association in Westminster, Colo., will cover different types of units, including solar and heat pump water heaters, program design and marketing and best practices.

Registration is free to Western customers ($100 for other attendees), but space is limited, so reserve your place now. Class materials, continental breakfast and lunch are included.