Efficient clothes dryer topic of free webinar

June 10, 2015
1 p.m. MDT

Join the Washington State University Energy Program on Wednesday, June 10, at 1:00 p.m. Mountain Time, for the Emerging Technologies Showcase webinar, Heat Pump Clothes Dryers – Will Life Ever Be the Same Again? You are leaving WAPA.gov.  

Schematics of a heat pump clothes dryer: 1. drum; 2. filter; 3. warm, humid air; 4. evaporator; 5. condensate; 6. compressor; 7. expansion device; 8. condensor; 9. blower; 10. hot dry air. (Artwork by Oak Ridge National Laboratory)

Schematics of a heat pump clothes dryer: 1. drum; 2. filter; 3. warm, humid air; 4. evaporator; 5. condensate; 6. compressor; 7. expansion device; 8. condensor; 9. blower; 10. hot dry air. (Artwork by Oak Ridge National Laboratory)

Residential clothes dryers are not known for their efficiency—in the U.S., these appliances consume 4 percent of our annual electricity use. Worse yet, 20 to 25 percent of their heat disappears up the dryer vent. No wonder clothes dryers are not included in the federal government’s Energy Star program. However, recent advances in dryer technology may be poised to change all that.

This webinar explores basic design types of energy-saving clothes dryers and the technologies that make them more efficient than current models. Lab and field testing results will be discussed in depth, with special focus on the importance of testing dryers on actual wet laundry and in different settings. Utilities can learn about the energy savings, cost and near-term availability of the appliances, as well as ideas for providing consumer guidance and financial support to interested customers.

A question-and-answer session follows the presentation. All webinars are recorded and available from Energy Efficiency Emerging Technologies You are leaving WAPA.gov. (E3T) and Conduit  energy efficiency forum.

Register You are leaving WAPA.gov. today for this free event, or contact E3T for more information.

Bonneville Power Administration sponsors this monthly webinar series with support from Western. Get latest information about promising energy-efficiency technologies and practices that BPA is considering for future research.

Source: Bonneville Power Administration, 5/14/15

Construction guidebook points way to efficient new buildings

Building energy efficiency into new construction is easier than teaching an old building (or building owner) new tricks. But many designers and builders still need schooling in energy-efficient construction—lessons that can be found in the New Construction GuideRedirecting to a non-government site.

The New Construction Guide from the New Building Institute offers a whole-building approach to achieving deep energy efficiencies in new building projects. (Art by New Building Institute)

The New Construction Guide from the New Building Institute offers a whole-building approach to achieving deep energy efficiencies in new building projects. (Art by New Building Institute)

The latest offering from the New Building Institute’sRedirecting to a non-government site (NBI) Advanced Buildings tool suite is a whole-building, step-by-step approach to new commercial construction projects that result in efficiencies up to 40 percent higher than conventional buildings. Building design and construction professionals can reference the New Construction Guide to define high performance in building envelope, lighting, HVAC, power systems and controls.

Learn from experts
The people behind the guide know how to achieve efficiencies without adding costs. The primary authors include NBI’s Technical Director Mark Frankel, Program Manager Sean Denniston and Project Manager Mark Lyles. Collectively, they bring decades of experience in improving building performance and strengthening building codes nationwide.

Technical contributions came from experts across the construction and building systems industry. The fields of energy efficiency and resource conservation, design, research and policy are well represented along with specific systems such as lighting, heating and cooling and building controls. The ASHRAE 90.1 standardRedirecting to a non-government site, the International Energy Conservation CodeRedirecting to a non-government site and the Consortium for Energy EfficiencyRedirecting to a non-government site were referenced for lighting and mechanical equipment performance levels. The guide also ties the measures to utility energy efficiency programs.

Modeling methodology
Underpinning the New Construction Guide is an extensive energy modeling protocol. The authors evaluated energy-efficiency measures using eQuest building energy use analysis software to conduct more than 100,000 modeling runs on prototype buildings.

They applied three to five measures to each building prototype and ran energy use analysis in ASHRAE’s eight identified climate zones represented by 16 US cities. Measures were only included if they offered savings beyond the baseline buildings in most scenarios, or significant savings in specialized cases. Once the most effective individual measures were identified, they were all applied as a package to each building prototype in each climate scenario to get predicted savings for the program as a whole.

Power providers get involved
The New Construction Guide has several utility sponsors who independently modeled the measures and validated the approach and methodology.

Ralph DiNola, NBI executive director, would like to see utilities incorporate the guide into commercial building incentive programs. “For example, some of our utility partners are offering builders dollars per square foot for implementing the guide,” he said. “Those programs have delivered cost-effective energy savings at a lower cost than other utility incentive programs.”

Utilities including ComEdRedirecting to a non-government site and NSTAR Electric and GasRedirecting to a non-government site have worked with builders in their territory to implement measures from the Core Performance Guide, the previous edition of the new guide, in local projects. Energy program administrator Efficiency MaineRedirecting to a non-government site and the transmission and distribution network National GridRedirecting to a non-government site both have building projects in the pipeline that implement the New Construction Guide.

Municipalities that have LEED [Leadership in Energy Efficient Design] requirements for new public buildings will find yet another use for the guide. The United States Green Building CouncilRedirecting to a non-government site allows the program to be used to achieve energy prerequisites and credits for LEED certification, on the version of LEED. 

About NBI
Established in 1997, the New Building Institute is dedicated to improving the energy performance of commercial buildings by providing policy and program direction, and promoting best design practices and available technologies. NBI’s board of directors comprises leaders in the energy efficiency and green building industries, including representatives from utilities like Pacific Gas and ElectricRedirecting to a non-government site.

The Advanced Building program promotes high performance buildings with technical tools and educational resources such as case studies, webinars, reference guides and research findings. Sponsors and supporters include the Department of Energy, Energy Center of WisconsinRedirecting to a non-government site and New York State Energy Research and Development AuthorityRedirecting to a non-government site.

NBI welcomes involvement from utilities. To learn more, contact NBI at 360-567-0950, or visit the speakers bureau for links to presentations.